The DAP CA-series Compact Amplifiers are exactly that! A very compact housed power amplifier with all the necessary features for the contemporary users. Within the family of 4 there are two straight forward 2-channel models of different amplifier power, one 3-channel model which has an included crossover to easily setup a 2.1 configuration, and one 4-channel model which also includes a crossover.
2 Ohms Stable
Yes
Output per channel into 8 ohms at 1 kHz
90 W
Output per channel into 4 ohm at 1 kHz
150 W
Output per channel into 2 ohm at 1 kHz
230 W
Bridge Output into 8 ohms at 1 kHz
190 W
Bridge Output into 4 ohms at 1 kHz
275 W
Output per channel into 8 ohm at 20 Hz > 20 kHz
90 W
Output per channel into 4 ohm at 20 Hz > 20 kHz
150 W
Output per channel into 2 ohm at 20 Hz > 20 kHz
230 W
Bridge Output 8 ohm on 20 Hz > 20 kHz
190 W
Bridge Output 4 ohm on 20 Hz > 20 kHz
275 W
Output Channels
2
Output Gain
28 dB
Output Mode
Bridge, Stereo
Output Connector
NL4, TRS unbalanced 6,3mm
Mono Inputs
2
Mono Input Connector
3pole XLR, TRS balanced 6,3mm
Mono Input Impedance
20.000 Ω
Mono Unbalanced Input Sensitivity
1 dBv
THD Level
< 0.1%
Signal-to-noise Ratio
> 96dB
SLEW Rate
15 V/μs
Amp Technology
Class D
Damping Factor
180 :1
Crosstalk
70 dBu
Frequency Response Minimum
20 Hz
Frequency Response Maximum
20.000 Hz
Dynamics Type
Limiter
Power Supply
220V-240 VAC 50Hz
SMPS Included
Yes
Power Consumption
425 W
Fuse
4 A
Power Connector in
IEC C13 female
Amplifier Airflow
Front to side
Amplifier Cooling
Axial fan
Height (mm)
44 mm
Width (mm)
484 mm
Length (mm)
281 mm
Installation Depth (excl. connector)
281 mm
Flightcase Size
19″
Rack Units
1 U
Housing
Metal
Colour
Black
Finish
Powder
Weight
3,7 kg
IP Rating
IP20(indoor use only)
Handles
No
Electronic Protection
Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart
LED Indicators
Clip, Power, Protect, Signal
