The PA 1500 stereo amplifier is for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit, operational mode selection (bridge, stereo or parallel) and input sensitivity selection.
Product Description
The PA 1500 stereo amplifier is for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit, operational mode selection (bridge, stereo or parallel) and input sensitivity selection. – 750 W x 750 W at 4 Ω – Input Sensitivity Selector – Stereo/Bridged/Parallel Operation – speakON output connectors – Clip, protection and Signal present LED indicators PA 1500 Features
| Stereo Mode (both channels driven) 8 ohms EIA 1 kHz 1% THD | 500 W |
| 4 ohms EIA 1 kHz 1% THD | 750 W |
| Bridge Mono Mode -8 ohms EIA 1 kHz 1% THD | 1500 W |
| Frequency Response | 20 Hz-20 kHz +0-1 dB |
| Signal to Noise Ratio (20 Hz-20 kHz) | > 100 dB |
| Distortion (SMPTE-IM) | ≤ 0.35% |
| Total Harmonic Distortion (20 Hz-20 kHz) | ≤ 0.35% |
| Damping Factor @ 8 ohms | > 200 |
| Input Sensitivity @ 4 ohms | 0.775 V o 1.4 V |
| Voltage Gain | 33 dB |
| AC Requirements | 230 V AC 50 Hz |
| Current Draw (1/3 power @ 230 V) | 7.5 A |
| Dimensions (H x W x D) | 8.8 x 48.2 x 22.7 cm |
| 3.5 x 19 x 8.9 in | |
| Weight | 13.5 kg |
| 29.8 lb |
