Free Nationwide shipping on orders over €500*

IK MULTIMEDIA iRig Pro I/O

185.00

Out of stock

The ultra-compact professional audio/MIDI interface for all your gear

Now record with any of your gear on the go, and monitor in real time with any compatible device! That’s iRig Pro I/O, the ultra-compact professional quality audio and MIDI in/out for your mobile recording life!

iRig Pro I/O is the next generation of the iRig Pro — the first mobile interface for connecting all of your studio gear to your iPhone, iPad, Mac, PC or Android device to play and record on the go.

iRig Pro I/O is a pocket-sized full-featured audio and MIDI interface that gives you 24-bit/96kHz recording studio quality sound everywhere you go with a few additional essential features for mobile recording.

Features

  • High definition 24-bit/96kHz audio plus MIDI interface for iPhone, iPad, Mac, PC and Android devices
  • Connects to everything, yet easily fits in your laptop bag, gig bag or pocket
  • Neutrik™ combo input for guitar, microphone or other instruments with a professional quality preamp, phantom power and gain control
  • iPhone 7 ready with integrated headphone output with volume control
  • Powered via USB bus, two AA batteries or the optional iRig PSU 3A (PSU simultaneously charges iOS device)
  • Detachable Lightning and USB cables included for connection to iPhone, iPad, Mac and PC (MFi certified)
  • Comes with a Velcro strip to secure iRig Pro I/O to a mic stand
  • Comes with over $/€550 worth of full version Software & Apps

Specs

iRig Pro I/O Specifications

Microphone Input

  • Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: 3.2 kOhms
  • Gain Range: 40 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

  • Instrument Input: unbalanced, Hi-Z, TS 1/4″ Jack, Tip: signal / Shield: ground
  • Instrument Input Level: from 30 mVpp to 6.9 Vpp
  • Instrument Input Impedance: 1 MOhms
  • Gain Range: 27 dB
  • Frequency Response: 20 Hz – 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

  • Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Control numbered thumbwheel
  • Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output

  • Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output

  • Connector: 2×2.5mm TS Jack

Other Input/Output

  • DC barrel: 1x DC barrel. For power and device charging.
  • Device Connector: mini-DIN

Common

Package includes

  • iRig Pro I/O universal Audio-MIDI interface
  • Lightning to Mini-DIN connection cable with charging features (60cm/23.62″)
  • USB to Mini-DIN connection cable (60cm/23.62″)
  • 2 x 2.5mm jack to MIDI cable (160cm/63″)
  • 2 x 1.5V AA Battery
  • Velcro strip

Dimensions

  • Size: 43mm/1.69″ x 127mm/5″ x 37mm/1.46″
  • Weight: ~120g/4.23oz (batteries excluded)
  • Lightning to Mini-DIN connection cable: 60cm/23.62″
  • USB to Mini-DIN connection cable: 60cm/23.62″
  • 2.5mm jack to MIDI cable: 160cm/63″

Compatibility

iOS Devices

Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation. iOS 6 or later is required.

Computers

Mac®: Mac OS X 10.6 or later. One free USB port.

Windows®: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio. See our FAQ here for further details.)

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
Micro-USB-OTG to Mini-DIN cable (sold separately) is required.

* Use only the specified AC adaptor
Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor’s body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A). The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.

Free included app/software

iRig Pro I/O comes with the following free bonus content

iPhone/iPad free content

  • FREE AmpliTube Essentials Bundle for AmpliTube CS for iPhone
    Upgrade from CS (FREE) version to PAID version – for FREE.
    More info | Download
  • FREE AmpliTube Essentials Bundle for AmpliTube CS for iPad
    Upgrade from CS (FREE) version to PAID version – for FREE.
    More info | Download

Mac/PC free content

  • AmpliTube 4
    Hyper realistic guitar amp and FX software.
    More info
  • SampleTank 4 SE
    Sound and groove workstation with over 30 GB of samples and 2,000 sounds.
    More info
  • SampleTank 3 SE
    Fully functional special edition of the ultimate sound and groove workstation with a 6.5 GB instrument library.
    More info
  • T-RackS 4 Deluxe
    High-End Mastering & Mixing Suite.
    More info
  • Mic Room
    Microphone Modeling Module for T-RackS.
    More info
  • 25 Gear Credits
    For AmpliTube, T-RackS and SampleTank Custom Shop.
    More info

 

 

Our Brands

Got A Question? Call us now on 086 600 4498
Copyright © 2024 DJ Solutions Site by CloveRock Design.
Top