NATIONWIDE DELIVERIES | FREE SHIPPING ON ALL ORDERS OVER €300

DAP IMIX-7.2 USB Install Mixer

759.00

  • Channel displays that show the input source
  • 2 built-in USB audio interfaces
  • VCA controlled faders
  • Reverb & talk-over on microphone channels
  • Individual in- and output VU’s
The IMIX-7.2USB is a unique installation mixer. It’s a 6U, 7 Channel, 2 Zone mixer with 2 built-in USB audio interfaces especially designed to fulfill all audio needs of a pub, school, small disco without scarifying on the ease of use. It is the world first installation mixer that shows the active channel source on a display. This will help users to select the desired source for the desired area. Each in- and output has own individual VU meters which gives you total level information in one view. The channel gain must be set at the back to prevent wrong use by non-technical users. The displays are pre-programmed with 16 different source names which can be set at the backside by an installer. It has 2 microphone inputs with an easy-to-use reverb effect and talk-over function. At the front it has direct inputs for a microphone, a line input and a dedicated phone/mp3 input. With a pair of headphones you can monitor all out- and inputs.

Specifications

Inputs
Mono Inputs:  2
Mono Input Connector:  3-pin XLR, TRS balanced 6.3 mm
Stereo Inputs:  7
Stereo Input Connector:  RCA
Auxiliary Inputs:  1
Auxiliary Input Connector:  RCA, TRS balanced 3.5 mm
Outputs
Main Outputs:  2
Main Output Connector:  3-pin XLR, RCA
Zone Output:  2
Zone Output Connector:  3-pin XLR, RCA
Monitor Output:  1
Monitor Output Connector:  RCA
Headphone Output:  1
Headphone Output Connector:  TRS balanced 6.3 mm
Record Output:  1
Record Output Connector:  RCA
Digital Playback
USB Input Audio Interface:  2
Input Connection Audio Interface:  USB-B
USB Type Audio Interface:  2.0
Sample Rate Audio Interface:  48 kHz
Supported Audio Interface Input Channels:  4
Audio Specifications
THD Level:  < 0.05 %
Signal-to-noise Ratio:  > 100 dB
Signal-to-noise Ratio Mic:  > 100 dB
Signal-to-noise Ratio Line:  > 100 dB
AD/DA Convertor Sample Rate:  48 kHz
Frequency Response Minimum:  20 Hz
Frequency Response Maximum:  20.000 Hz
Phantom Power:  No
Sound Editing
Parametric Channel Equalizer:  3 Bands
Input Channel Equalizer Range:  12 dB
Channel Input Fixed Frequencies:  80, 1.000, 12.000 Hz
Microphone Input Equalizer Range:  12 dB
Parametric Microphone Equalizer:  3 Bands
Microphone Input Fixed Frequencies:  120, 800, 5.000 Hz
Built-in FX:  Yes
FX Types:  Reverb
Software Specifications
Supported Operating Systems:  Mac, Windows
Control and Programming
Display:  7-segment
Product Properties
LED Indicators:  Channel select, Clip, Output level, Signal
Electrical Specifications and Connections
Power Supply:  100-240 VAC 50-60 Hz
Power Consumption:  33 W
Fuse:  1 A
Power Connector in:  IEC C13 female
Data Connector in:  USB
Mechanical Specifications
Fader Length:  100 mm
Height (mm):  266 mm
Width (mm):  135 mm
Length (mm):  481 mm
Flightcase Size:  19″
Rack Units:  6 U
Housing:  Metal
Colour:  Black
Weight:  6,4 kg
IP Rating:  IP20(indoor use only)
Certifications/Qualifications
Reference Standard:  CE, FCC, RoHS
Included Items
Included Cables:  IEC cable, USB-A – USB-B cable
Got A Question? Call us now on 086 600 4498
Copyright © 2021 DJ Solutions Site by CloveRock Design.
Top