The Showtec Pixel Controller is an easy-to-use four-output RGB pixel controller with dimmer function, suitable for controlling a variety of Pixel products, like the Pixelstrip 20/40, Pixeltube 16/32 and Pixel Dot. This controller is not only externally controllable by DMX, Master/Slave, Art-Net and Kling-Net, but can also be used as a stand-alone controller with built-in programs. Each of the 4 outputs can handle up to 4 m (13.1 ft) Pixelstrip, 5 m (16.4 ft) Pixeltube and 40 Pixel Dots. When using Art-Net, you are able to gain full control of all pixels to create stunning effects.
Controller for Pixelstrip, Pixeltube and Pixel Dot
Individual Pixel Control
Each output drives up to 4 m (13.1′) Strip, 5 m (16.4′) Tube, or 40 Dots
DMX, Art-Net & Kling-Net controllable
Dimmer function
Control Mode Art-Net, Auto, DMX, Kling-Net, Manual, Master Slave
DMX Channels 7, 480, 1920
Dimmer 0-100 %
Power Supply 100-240 VAC 50-60 Hz
Output Voltage 24 VDC
Power Consumption 230 W
Power Connector in Power Pro Blue
Power Connector out Power Pro Grey
Height (mm) 342 mm
Width (mm) 210 mm
Depth (mm) 68 mm
Weight 2.1 kg
IP Rating IP20 (indoor use only)
Housing Metal
Colour Black
Cooling Convection