If you would need 2 wireless microphones, and have just one channel available on your inputs, the COM-42 is the ideal wireless microphone set for you. The wireless receiver has a balanced XLR output for each wireless transmitter, and also an unbalanced MIX output on a 6.3mm Jack plug. By using the volume buttons on the front of the receiver, it is easy to setup the desired balance between 2 transmitters. The COM-42 has 99 frequency present which can be set easily through infrared synchronization technique. A clear LCD display shows the signal strength, audio level and carrier frequency of each channel. A COM-42 wireless microphone set contains a receiver and 2 metal handheld transmitters. Also it is possible to use an optional beltpack transmitter.
- compact 2 channel receiver
- Infra-red synchronization technique
- metal handheld microphone
- colour coding stickers included
| RF Antenna Inputs | 2 |
|---|---|
| RF Antenna Input Connection | BNC |
| Microphone Output | 1 |
| Microphone Output Connection | 3pole XLR, TRS unbalanced 6,3mm |
| Frequency Response Minimum | 50 Hz |
| Dynamic Range | 100 dB |
| Frequency Response Maximum | 16000 Hz |
| On/Off Switch Microphone | Yes |
| Max. SPL | 135 dB |
| Polar Pattern | Cardioid |
| Microphone Sensitivity | 2.2 mV |
| Microphone Type | Dynamic moving coil |
| Signal – Noise Ratio | > 100dB |
| THD Distortion Level | < 1.0% |
| RF Bandwith | 24 MHz |
| Spurious Rejection | 50 <- dBC |
| Frequency Deviation | 225 ± kHz |
| RF Power | 10 mW |
| Wireless Stability | 0.005 % |
| Wireless Microphone Frequency Band Start | 606 MHz |
| Wireless Microphone Frequency Band End | 630 MHz |
| Type | AA |
| Voltage | 1.5 V |
| Runtime Average | 6 h |
| Channels | 99 |
| Display | LCD |
| Power Connector in | Low Voltage DC plug |
| Output Voltage | 15VDC |
| Power Supply | 240VAC 50Hz |
| Length Transmitter (mm) | 260 mm |
| Colour | Black |
| Housing | Aluminium |
| Rack Units | 1 U |
| Flightcase Size | 19″ |
| Weight | 1 kg |
| Diameter | 50 mm |
| Length (mm) | 210 mm |
| Height (mm) | 45 mm |
| Width (mm) | 210 mm |
| Weight transmitter | 0.27 kg |
| Installation Depth (excl. connector) | 210 mm |
| LED Indicators | Battery status, Power |
| Reference Standard | CE |
| Included Accessories | Adapter, Colour-coded stickers, Screwdriver |
