Shure BLX1288/CVL-K3E Dual Wireless System with PG58 and CVL

Powerful PG58 Vocal Performance

The Shure BLX2/PG58 transmitter contains a tailored frequency response that provides a clean, smooth sound designed specifically for vocal performances. The cardioid polar pick-up pattern is less susceptible to feedback interference and picks up sound from both the front and sides. In addition to the feedback protection, the PG58 features a pop filter to deter abrupt breathing sounds and wind noise. The dynamic cartridge within the PG58 features a neodymium magnet for high output levels and allows you to handle extreme volume levels without experiencing distortion.

Discreet, Hands-Free Capabilities

The CVL microphone offers a discreet and miniature option ideal for professional presentations. The clip-on design lets you easily hide the microphone so you can focus on your hands-free performance. Clear vocal reproduction is delivered via a permanently charged electret condenser and the cardioid pick-up pattern rejects any unwanted noise. The lavalier microphone features a tailored frequency response to optimise speaking performances and includes classic Shure durability.

BLX88 Receiver

The BLX88 receiver is compatible with up to 12 systems and is simple to setup. The receiver features internal antenna, a one touch QuickScan that locates the best open frequency and two colour audio status indicator LED display.

BLX1 Bodypack Transmitter

The transmitter included within this Shure wireless system is both lightweight and durable. The compact transmitter fits comfortably in hand and features adjustable gain control, quick and easy frequency matching and a power/battery status LED. The BLX1 can run up to 14 hours of continuous use with AA batteries (included with the system) and has an operating range of up to 100 metres.

Included In The System

• 1 x BLX1 Bodypack Transmitter
• 1 x BLX88 Dual Channel Receiver
• 1 x CVL Lavalier Condenser Microphone
• 1 x BLX2/PG58
• 1 x Swivel Adapters
• 1 x Power Supply
• 1 x Thread Adapter

Features

BLX2/PG58 Handheld Transmitter

• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries (included) provide up to 14 hours of continuous use
• 100 m (300 ft) operating range (line of sight)
• Integrated microphone capsule design
• -10 dB gain attenuation
• Lightweight, rugged construction

CVL Lavalier Condenser Microphone

• Miniature design provides low visibility
• Permanently charged electret condenser cartridge
• Cardioid pick-up polar pattern
• Includes windscreen & tie-clip
• Frequency response tailored for speaking & presentations
• TA4F (TQG) connectors work seamlessly with Shure wireless bodypack systems

BLX88 Receiver

• Up to 12 compatible systems
• Internal antenna
• One touch QuickScan
• XLR & 1/4″ audio outputs
• Two colour audio status indicator, LED

BLX1 Wireless Bodypack Transmitter

• Power & battery status LED
• Adjustable gain control
• Quick & easy frequency matching
• Included AA batteries that provide up to 14 hours of continuous use
• Operating range of up to 100 metres

Specifications

BLX1288/CVL Wireless System

• Set Type: Lavalier/Handheld Combo
• Amount Of Bodypacks: 1
• Amount Of Handhelds: 1
• Amount Of TQG Mics: 1
• Number Of Compatible Systems Per Frequency Band: 12

BLX2/PG58 Wireless Transmitter

• Form Factor: Handheld
• Operating Range (Up To): 100 m (Under Typical Conditions)
• Transmitter Housings: Molded ABS
• Audio Mute: No
• Detachable Antennas: No
• Switchable RF Power: No
• Batteries: AA
• Battery Status: Multi-Colour LED
• Frequency Diversity: No
• Functionality: Transmitter
• High Density Mode: No
• Weight: 340 g
• Transmitter Weight: 218 g
• Dimensions:
  • Height: 224 mm
  • Width: 53 mm
  • Depth: 53 mm

CVL Lavalier Condenser Microphone

• Frequency Response: Tailored, 60Hz – 12kHz
• Sensitivity: -43.50 dBV/Pa – 6.70 mV/Pa
• Equivalent Selfnoise: 22 dB(A)
• Sound Pressure Level: 139 dB
• Transducer Type: Condenser
• Polar Pattern: Cardioid
• Switchable Low Cut: No
• Connectors: TQG
• Attenuator: No
• Interchangeable Capsule: No
• Main Functionality: Installed
• Headphone Output: No
• Requires Phantom Power: 5 V DC (Nominal), 10 V Maximum (DC Bias) VDC
• Weight: 25 g

BLX88 Receiver

• Transmission: Analog
• Type Of Power Supply: External
• Receiver Housings: Molded ABs
• Active Antenna Possible: No
• Bias via BNC: No
• High Density Mode: No
• Interference Detection: No
• Remote Control: No
• Number Of Compatible Systems Per Frequency Band: 12
• DANTE Audio Network Interface: No
• Scan Features: Quick Scan
• Detachable Antennas: No
• Logic: No
• Cascade: No
• Rack Hardware: Optional URT2
• Receiver Displays: LEDs
• Receiver Type: Dual
• Line Mic Switch: No
• Image Rejection: 50 dB, Typical
• RF Sensitivity: -105 dBm, For 12dB SINAD, Typical
• Phantom Power Protection: No
• Weight: 429 g
• Dimensions
  • Height: 40 mm
  • Width: 388 mm
  • Depth: 116 mm

BLX1 Wireless Bodypack Transmitter

• Form Factor: Bodypack
• Operating Range (Up To): 100 m
• Battery Life Alkaline: 14 h
• Transmitter Housings: Molded ABS
• Audio Mute: No
• Detachable Antenna: No
• Switchable RF Power: No
• Batteries: AA
• Battery Status: Multi-Colour LED
• Connectors: TQG
• Frequency Diversity: No
• Functionality: Transmitter
• Gain Adjustment Range: 26 dB
• High Density Mode: No
• Included Antenna: 1/4 Wave
• Input Impedance: 1 M?
• Weight: 75 g
• Dimensions:
  • Height: 110 mm
  • Width: 64 mm
  • Depth: 21 mm