The Pioneer DDJ FLX10 is a four channel DJ controller, built to run both Pioneer Rekordbox and Serato DJ software. Combining classic pioneer controls with forward thinking effects and performance features, this controller brings an exceptional versatility to the table that its predecessors did not. This attractive controller is ideal for any application and setting; you could use it professionally in a club, at a festival and for DJing weddings, you could even use it to practice your blends at home, or in front of your friends at a party. The two deck control sections are each equipped with a jog wheel surrounded by multiple looping, reverse and slip controls, as well as other sequencing tools, jog wheel settings, pitch fader, cue and play buttons and eight tactile backlit performance pads. The track control sections also feature a deck selection button for swapping between channels, and menu browsing controls above each jog wheel, so you can easily select tracks for the current channel loaded to the deck. Three stem separation buttons at the top of the deck section allow you to isolate vocals, drums and instruments from the track that is playing, this works in both Rekordbox and Serato.
Featuring traditional Pioneer controls, the mixer section of the DDJ FLX10 is comprised of four channels, each with a trim attenuator, a vertical volume fader, a three band EQ and a sweep FX knob, that allows you to utilise one of six FX to sweep the full frequency range of the channel output. All channels also feature a crossfader assign switch that assigns either turns the fader off for that channel or assigns it to either the A(left) or B(right) axis of the proprietary Magvel Crossfader. Extensive Effects have always been a part of the Pioneers signature DJ controllers, and on the DDJ FLX10 there is an in depth beat FX bus that gives you ultimate sound shaping ability. Up to 14 beat FX can be selected and assigned to any channel or the master output. Beat FX can be adjusted, divided and multiplied, the resonance, level and depth can be increased. With stem separation and dedicated buttons on the FX bus, you can pick an individual part of the track to apply the effect to: the drums, the instruments, or the vocals. Also featured on the mixer are the microphone, sampler, headphones, and master output volume control sections.
On the back of the DDJ FLX10 is a wide range of inputs and outputs that show of the dynamic nature of the controller. Four RCA inputs each dedicated to one of the mixer channels allow you to connect external DJ equipment into them. Channels one and two accept line input, and channels three and four feature phono preamps that can receive phono signals from turntables and other analog equipment with weaker signals; it also features a ground wire that removes ground loop problems experienced with older turntables. Two USB C ports labelled A and B allow you to connect two control devices at once, so you and a fellow DJ can hook up both of your laptops and play without having to transfer tracks all to one laptop and format them in a different software. Switches on the mixer section allow you to assign the channels to either A or B usb device or the phono/line output. Microphones can be connected via a hybrid XLR/Jack or a standard TRS input, giving you the option to connect more than one microphone. To connect to the sound system you are DJing with, you have two master outputs in the form of XLR and RCA and a booth output. There is even a DMX output that allows you to integrate your DJ controller into the lighting rig. The DDJ FLX10 is a cutting-edge Pioneer DJ controller designed for both professional and recreational DJs.
Revolutionary Pioneer Design
Combining classic pioneer controls with forward thinking effects and performance features, the Pioneer DDJ FLX10 controller brings an exceptional versatility to the table that its predecessors did not. Designed to be used with a laptop or DJ software compatible portable device, this attractive controller is ideal for any application and setting; you could use it professionally in a club, at a festival and for DJing weddings, you could even use it to practice your blends at home, or in front of your friends at a party. Compatible with both Pioneer Rekordbox, and Serato DJ software, you can enjoy DJing on the DDJ FLX10 with whichever software you prefer, it even comes with a free voucher for Serato Pitch ‘n’ Time DJ expansion, offering ultimate digital blending tools.
The two deck control sections are each equipped with a multicolour LED lighted jog wheel, surrounded by multiple looping, reverse, and slip controls, as well as other sequencing tools, jog wheel settings, pitch fader, cue and play buttons and eight tactile backlit performance pads. The track control sections also feature a deck selection button for swapping between channels, and menu browsing controls above each jog wheel, so you can easily select tracks for the current channel loaded to the deck. Three stem separation buttons at the top of the deck section allow you to isolate vocals, drums and instruments from the track that is playing, this works in both Rekordbox and Serato, and you can also isolate a part of the track and send it to another deck, so you can scratch, chop, and alter your sounds in a playful and unique style.
Ultimate control and Intricate effects
Featuring traditional Pioneer controls, the mixer section of the DDJ FLX10 is comprised of four channels, each with a trim attenuator, a vertical volume fader, a three band EQ and a sweep FX knob, that allows you to utilise one of six FX to sweep the full frequency range of the channel output. All channels also feature a crossfader assign switch, that assigns either turns the fader off for that channel or assigns it to either the A(left) or B(right) axis of the proprietary Magvel Crossfader, a cutting edge crossfader design utilising a four sensor system allowing you to make small volume adjustments with only slight movements.
Extensive Effects have always been a part of the Pioneers signature DJ controllers, and on the DDJ FLX10 there is an in depth beat FX bus that gives you ultimate sound shaping ability. Up to 14 beat FX can be selected and assigned to any channel or the master output. Beat FX can be adjusted, divided, and multiplied, and the resonance, level, and depth can be increased. With stem separation and dedicated buttons on the FX bus, you can pick an individual part of the track to apply the effect to: the drums, the instruments, or the vocals. Also featured on the mixer are the microphone, sampler, headphones, and master output volume control sections.
Versatile connectivity
On the back of the DDJ FLX10 is a wide range of inputs and outputs that show of the dynamic nature of the controller. Four RCA inputs each dedicated to one of the mixer channels allow you to connect external DJ equipment into them. Channels one and two accept line input, and channels three and four feature phono preamps that can receive phono signals from turntables and other analog equipment with weaker signals; it also features a ground wire that removes ground loop problems experienced with older turntables. Two USB C ports labelled A and B allow you to connect two control devices at once, so you and a fellow DJ can hook up both of your laptops and play without having to transfer tracks all to one laptop and format them in a different software.
Switches on the mixer section allow you to assign the channels to either A or B USB device or the phono/line output. Microphones can be connected via a hybrid XLR/Jack or a standard TRS input, giving you the option to connect more than one microphone. To connect to the sound system you are DJing with, you have two master outputs in the form of XLR and RCA and a booth output. There is even a DMX output that allows you to integrate your DJ controller into the lighting rig. The DDJ FLX10 is a cutting-edge Pioneer DJ controller designed for both professional and recreational DJs.
What’s in the box
- Power cord
- AC adaptor
- USB Type-C cable
- Serato voucher(Pitch ‘n Time DJ)
- Quick Start Guide
- Precautions for use
- Warranty (selected regions only)
Features
- Professional DJ controller compatible with both Rekordbox and Serato DJ software
- Four channels each with a three band EQ and an independent sweep FX knob
- Six sweep FX and 14 beat FX allow you to add depth and colour to your blends
- Stem separation allows you to isolate vocals, drums and instruments from your tracks
- Beat FX can be assigned to certain stems with a dedicated control panel on the FX bus
- Dual USB ports allow you to connect two different devices at the same time
- RCA inputs for each channel allow you to plug external DJ gear into the controller
- Channels three and four have pre-amps for turntables and analog gear without line signal strength
- you can connect up to two microphones with an XLR/Jack hybrid and a standard TRS input
- RCA and XLR master output as well as balanced TRS booth output
- DMX output for integration with Rekordbox lighting program
- Compatible with Rekordbox and Serato DVS systems (sold separately)
Specifications
Performance Control:
- Channels:Â 4
- Deck Control:Â 4
- Jog Wheel:Â 170 mm
- Beat FX:
- LOW CUT ECHO
- Echo
- Multi Tap Delay
- Spiral
- Reverb
- Trans
- ENIGMA JET
- Flanger
- Phaser
- Stretch
- Slip Roll
- Roll
- MOBIUS (SAW)
- MOBIUS (TRIANGLE)
- Sound Color FX:
- Space
- Dub Echo
- Crush
- Pitch
- Noise
- Filter
- Sampler:Â 16slot x 4bank
- Hot Cues:Â 16
- Pad Modes Rekordbox:
- Hot Cue
- Pad FX 1
- Beat Jump
- Sampler
- Keyboard
- Pad FX 2
- Beat Loop
- Key Shift
- Pad modes Serato:
- Hot Cue
- Pad FX
- Beat Jump
- Sampler
- Pitch Play
- Roll
- Auto Loop
- Key Shift
Terminals:
- Inputs:
- 2 LINE (RCA)
- 2 PHONO/LINE (RCA)
- 1 MIC (XLR & 1/4 inch TRS Jack)
- 1 MIC (1/4 inch TRS Jack)
- Outputs:
- 1 MASTER (XLR)
- 1 MASTER (RCA)
- 1 BOOTH (1/4 inch TRS Jack)
- 1 PHONES (1/4 inch stereo phone Jack)
- 3.5 mm stereo mini jack x 1
- DMX:Â 1 XLR connector (3pins)
- USB:Â 2 USB C ports
General:
- Frequency Range: 20Hz – 20KHz
- Soundcard:Â 24 bit/44.1 kHz
- Signal-to-Noise Ratio:Â 110 dB
- Distortion:Â < 0.002 (USB)
- Power Consumption:Â DC 12 V, 3 000 mA
- Dimensions:Â 716mm x 73.4mm x 400.3mm (WxHxD)
- Weight:Â 6.7kg
- Product code:Â DDJ-FLX-10
