NATIONWIDE DELIVERIES | FREE SHIPPING ON ALL ORDERS OVER €300

FBT Mitus 215A

2,600.00

Available on back-order

Processed active speaker
1100w + 250w RMS – 136dB SPL

 

The FBT MITUS 215A two-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°.

The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers.

The FBT MITUS 215A provides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59″ baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.
The control panel provides XLR input & link, level, preset, delay, HP filter.
The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

TECHNICAL SPECIFICATIONS

NET DIMENSION (WXHXD): 493x1245x471 – 19.04x49x18.5 mm/inch
NET WEIGHT: 52.5/115.74 Kg/lb
TRANSPORT DIMENSION (WXHXD): 618x1335x610 – 24.3×53.3×24 mm/inch
TRANSPORT WEIGHT: 58/127.86 Kg/lb
MAXIMUM SPL CONT/PEAK: 133/136 dB
DISPERSION: 60°x40° HxV
INPUT IMPEDANCE: 22 Kohm
INPUT CONNECTOR: XLR with loop
POWER CORD: 5/16.4 m/ft
BUILT-IN AMPLIFIER LF/HF: 1100/250 W RMS
FREQUENCY RESPONSE: 42Hz-20Khz -6dB
LOW FREQUENCY WOOFER: 2×15 – 3 coil neodymium inch
HIGH FREQUENCY DRIVER: 1×2- 2.5 coil inch
CONFIGURATION: 2 way
Got A Question? Call us now on 086 600 4498
Copyright © 2021 DJ Solutions Site by CloveRock Design.
Top