Free Nationwide shipping on orders over €500*

LD Systems MAUI 44 G2 SUB Powered 15″ Subwoofer for MAUI 44 G2

1,750.00

  • Powered 15″ subwoofer with flow-optimised bass-reflex ports
  • 15″ custom-designed woofer with deep bass down to 37 Hz
  • Preset-Switch for cardioid subwoofer configuration
  • DynX® DSP technology for distortion-free sound at maximum volume
  • Automatic set-up detection
  • Rugged subwoofer housing made out of polyurea-coated birch plywood
  • Shockproof front grille for ultimate speaker protection
  • Two ergonomic handles covered in rubber for easy handling
  • Attachment points for our MAUI® 44 G2 CB castor board
Crisp, powerful bass blasting out the front, drowned out by muffled Low-End and feedback loops in the back – with LD Systems MAUI® 44 G2 SUB, this is a scenario of the past!The additional powered MAUI® 44 G2 SUB-woofer broadens the cardioid properties of our professional column loudspeaker series down to the Bass range.

Well, what does that mean?Simply position the SUB next to your MAUI® 44 G2 facing the rear direction, press the cardioid button and you will have a quieter and controlled Low-End on the back while still keeping the punch on the front. Low-End frequencies on the back of the system will be dampened by -15 dB. For extra Bass, keep the SUB in the same direction as your MAUI® 44 G2 without pressing the cardioid button.

Setting up the SUB with your MAUI® 44 G2 is straight forward and fast. Thanks to its automatic set-up detection system the SUB immediately switches to FOLLOWER mode as long as no column is attached.

Also recommendable is the protection cover and castor board to make transportation easy and keep the SUB as long as possible free of any touring-damage.

The MAUI® 44 G2 SUB features the same design construction as the MAUI® 44 G2 subwoofer and will be the perfect addition to get your Low-End in control.

Specifications

Product type:  PA Complete Systems Accessories
Type:  Powered
Low/mid driver dimensions:  15 “
Woofer size:  381 mm
Woofer magnet:  Neodymium
Woofer brand:  Custom-made
Woofer voice coil:  4 “
Woofer voice coil (mm):  101 mm
Amplifier:  Class D
System Power (RMS):  800 W
Peak power:  1600 W
Max. SPL (peak):  126 dB
Protection circuits:  Convection, DC, limiter, short circuit, thermal overload
Controls:  Bluetooth HOLD TO LINK button, Bluetooth STEREO LINK button, Cardioid On/Off, Main level, Power On/Off, Sub level
Indicators:  Bluetooth, Bluetooth STEREO LINK, Cardioid On/Off, Follower mode, Limit, Power, Protect (protection circuit engaged), Signal
Line inputs:  2
Line input connectors:  2 x XLR
Line outputs:  2
Line output connectors:  2 x XLR
Loudspeaker outputs:  1
Speaker output connections:  Custom-made multipin
Operating voltage:  100 – 120 V / 50 – 60 Hz or 200 – 240 V / 50 – 60 Hz (automatic switching), Switching power supply
Operating Temperature:  0 – 40 °C
Relative Humidity:  < 80% (non-condensing)
Cabinet material:  18 mm Birch Plywood
Cabinet surface:  Polyurea
Cabinet construction: ; Bass Reflex
Bluetooth Standard:  A2DP
Bluetooth Audio Decoder:  AAC, aptX, SBC
Width:  434 mm
Height:  634 mm
Depth:  637 mm
Weight:  36,4 kg
DSP characteristics
Bit depth AD/DA converter:  24 bit
Sampling frequency:  48 kHz
Signal-to-noise ratio:  106 dB

Our Brands

Got A Question? Call us now on 086 600 4498
Copyright © 2024 DJ Solutions Site by CloveRock Design.
Top