Free Nationwide shipping on orders over €500*

dB Technologies ES602


Out of stock

The ES Series is the result of experience gained from dBTechnologies in the acoustic design of vertical array systems like DVA T Series and MINI. The components of the top are aligned mechanically (Logarithmic Curved Column Array) so as to increase the coverage of the vertical beam. Furthermore, there is a special “double-ringed phase plug” that increases the horizontal coverage and gives a rich and crystal clear sound to the system.

The bass-reflex subwoofer houses a generous 10” woofer and the amplifier module. The enclosure, sturdy and stylish, is made of birch plywood coated with a durable scratch-resistant black coat, which makes it truly road-ready. Two recessed handles (one per side) help easy transport. Finally the metal grid with foam, in addition to protecting the woofer and give a very elegant and professional look, helps the reflex effect.  The lower part of the grid, placed right on the reflex ports, have in fact holes with a larger diameter to enhance air flow.

The satellite is connected to the subwoofer through the supplied D25mm pole. The system is used in mono mode so that all inputs are routed to both outputs in mono.

The highly efficient amplifier provides high power with limited weight and dimension.

The digital preamplifier with DSP (Digital Signal Processing) controls the audio crossover of the acoustic components, the frequency response, the limiter, and the phase alignment.

The DSP allows to choose among 8 different equalizations:

1- Flat

2- Bass Boost

3- Bass Reduction

4- Playback

5- Club

6- Vocal

7- Monitor

8- Antifeedback

Technical Data
Speaker Type
bi-biamped system, with one full range top and one subwoofer
Acoustical data
Frequency Response [-10dB]
44 – 15.000 Hz
118 dB
4x 3″
Type MF – HF
Amp Technology
Digipro® G3
Amp Class
Power Amp Peak
800 W
DSP 24 Bit/48 kHz
System Presets
Factory presets
Dual Active, Peak, RMS, Thermal
Crossover Frequency LF-HF
210 Hz
Mic/Instrument Channel
1x Combo (XLR/Jack) balanced/unbalanced input, 1x RCA stereo input
Link Output
1x XLR balanced output
Housing (Subwoofer)
15mm Black Painted Plywood
Housing (Tops)
Polypropylene PP
2x lateral side (Subwoofer)
Width (Top)
95 mm (3.74 in)
Height (Top)
360 mm (13.98 in)
Depth (Top)
137 mm (5.39 in)
Width (Subwoofer)
300 mm (13.8 in)
Height (Subwoofer)
400 mm (15.7 in)
Depth (Subwoofer)
430 mm (16.9 in)
Weight (Top)
1.9Kg – 4.19lbs.
Weight (Subwoofer)
14.2Kg – 31.48lbs.
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

Our Brands

Got A Question? Call us now on 086 600 4498
Copyright © 2024 DJ Solutions Site by CloveRock Design.