Showroom in Kilkenny open 6 days a week | Nationwide next day deliveries with DPD

LD Systems Maui 44 G3

€2,499.00

Available to Order

The MAUI 44 G3 is a high-performance, fully active 4-way column PA system with a passive cardioid column design. Developed for demanding live performances, it combines powerful full-range sound, plenty of headroom and controlled dispersion with the fast, straightforward handling the MAUI series is known for.

The high-power 15″ neodymium woofer delivers punchy, precise low end down to 34 Hz. Specially airflow-optimised bass reflex ports reduce turbulence and port noise, ensuring clean, defined bass even at high output levels.

The two-piece column houses a total of 14 × 3.5″ neodymium midrange drivers and 4 × 1″ compression drivers. In the upper column section, newly developed phase plugs and BEM-optimised waveguides ensure even, controlled dispersion. The lower column section features horn-loaded midrange drivers for increased efficiency, substantial headroom and powerful, clear vocal reproduction. The result is coherent mid- and high-frequency reproduction with a dispersion pattern of 120° × 25°.

The column’s passive cardioid design directs sound energy towards the audience while attenuating rearward radiation by up to 18 dB. This significantly reduces unwanted sound on stage. With an additional rear-facing MAUI 44 G3 SUB and the Cardioid preset, this principle can be extended to the low-frequency range, increasing bass output towards the audience while noticeably reducing it behind the system. For maximum bass boost, the second subwoofer can instead be positioned facing forwards, doubling the sound pressure in the low-frequency range (+6 dB).

The Class-D amplifier delivers 1,800 W RMS (3,600 W peak), enabling a maximum SPL of 133 dB. The fully active 4-way architecture uses dedicated driver groups and amplifier channels for each frequency band. Crossover frequencies are set at 200 Hz, 700 Hz and 1,800 Hz. Equipped with DynX® DSP (Gen. 2) and advanced peak, RMS and thermal limiters, the MAUI 44 G3 delivers clean, undistorted sound even at the highest output levels.

Two XLR/TRS combo inputs, two Thru outputs and a dedicated sub output allow for straightforward system integration and flexible expansion. Bluetooth 5.4 with SBC and AAC codec support enables convenient wireless playback.

The polyurea-coated birch multiplex subwoofer enclosure and rugged aluminium columns are built to withstand everyday professional use. Four ergonomic carrying handles on the subwoofer and recessed handles in the columns make transport and handling easier.

The MAUI 44 G3 is ideal for DJs, bands and event service providers who want professional sound reinforcement with minimal setup effort.

Specifications

General

Type (active/passive) Active
Peak output power 3600 W
RMS output power 1800 W
Amp class Class D
SysLink® No
Max. SPL peak 133 dB
Frequency response (-6 dB, rel. Avg) 37 Hz – 20000 Hz
Frequency response (-10 dB, rel. Avg) 34 Hz – 20000 Hz
Speaker system 4-way system
Crossover frequency 200 Hz / 700 Hz / 1800 Hz
Dispersion Hor.: 120° / Vert.: 25°
Number of inputs 2
Input connector types XLR combo socket
Number of outputs 3
Output connector types XLR 3-pole male
Protection features Limiter, Overheating
Colour Black

Bluetooth®

Bluetooth® version 5.4
Supported audio codecs AAC, SBC, aptXâ„¢
Receiver (client) No
Transmitter (host) No

Signal processing

Mixer No
AD/DA converter bit depth 32 Bit, 24 Bit
AD/DA converter sampling rate 48 kHz
Min. Signal-to-noise ratio (SNR) 106 dB

Bass driver

Size 15 “
Magnet Neodymium
Voice coil 4 “

Mid range

Size 3.5 “
Quantity 14
Voice coil 1 “
Magnet Neodymium

Tweeter

Driver size 1 “
Quantity 4
Design Compression driver with waveguide
Magnet Neodymium
Voice coil 1 “

Mains operation

Operation voltage 100 V AC – 240 V AC / 50 – 60 Hz
Power supply type Switched-mode power supply (SMPS)
Rated power 900 W
Mains connector Mains socket indoor power in male & powerCON®
Mains connector model name powerCON®
Mains fuse T10AL/250 V

Satellites/columns

Number of handles 2
Chassis material Aluminium
Housing coating Powder coated
Width 103 mm
Height 1626 mm
Depth 136 mm
Weight 12 kg

Subwoofer

Design Bass reflex
Number of handles 4
Material Birch multiplex
Material thickness 18 mm
Surface coating Polyurea
Front grille material Steel
Width 434 mm
Depth 638 mm
Height 634 mm
Weight 34.5 kg

Dimensions & weight

Width 434 mm
Height 2259 mm
Depth 638 mm
Weight 46.5 kg

Our Brands

Got A Question? Call us now on 086 600 4498
Total Sound & Lighting Solutions Ltd T/A DJ Solutions Company Registration Number: 701350 VAT Number: IE3792003HH