The MON 10 A G3 is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design.
Although it is still very compact and can therefore be integrated inconspicuously into the stage set, the MON 10 A G3 delivers sufficient sound pressure to assert itself even in louder band situations. The ideal dispersion geometry of 50° x 90° for monitor use and 90° x 50° for FOH use make it a multi-talent that offers the right solution for many different tasks.
Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.
Specifications
General
Product type: Stage monitors
System output (RMS): 300 W
System output (Peak): 1200 W
Max. SPL Average (Sine burst): 118 dB (100 Hz – 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst): 126 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB): 72 – 18000 HZ
Frequency response (-10 dB): 58 – 20000 Hz
Crossover frequency: 1700 Hz
Dispersion (H x V): 50° x 90°
Features: 3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions: 10 “
Woofer dimensions (mm): 254 mm
Woofer brand: Custom-made
Woofer type: Coaxial loudspeaker
Woofer voice coil (mm): 65 mm
Cabinet construction: Bass Reflex
Cabinet material: 15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm): 25.4 mm
Tweeter brand: Custom-made
Tweeter voice coil: 1.75 “
Tweeter voice coil (mm): 44.45 mm
Amplifier module (integrated)
Protection circuits: Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature: 0 – 40 °C
Humidity Range: < 80 % ( non-condensing )
Controls: On / off switch, Rotary/push encoder
Operating voltage: 100 V AC – 240 V AC, 50 – 60 Hz
Power in / out: PowerCON compatible
Line input connectors: 6.3 mm jack, XLR – combo
Line through connector: XLR
